Raspberry Pi 7 inch Capacitive touch screen for 4B/3B+

$139.99

What does the Raspberry Pi 7 inch Capacitive touch screen for 4B/3B+ have to offer – This high-quality 7-inch standard display is a capacitive touch screen that supports touch control. It supports standard HDMI interface input. It needs to connect to Raspberry Pi by USB cable and HDMI cable. HDMI cable is used to display and a USB cable is used to touch. Similar to the 5-inch resistive touch screen, this 7 inch touch screen also supports backlight control with the ability to turn off the backlight to save power. The 7-inch screen possesses a larger screen as compared to other 5 inch and 3.5 touch screens making it a lot easier to use and providing a better user experience overall. So go ahead and grab one now!!!!

Please Note – This product DOES NOT ship with the Raspberry Pi 4B (1GB) or the Raspberry Pi 3B+. 

Out of stock

SKU: otl-000-0159 Categories: , Tags: , ,

Description

What does the Raspberry Pi 7 inch Capacitive touch screen for 4B/3B+ have to offer – This high-quality 7-inch standard display is a capacitive touch screen that supports touch control. It supports standard HDMI interface input. It needs to connect to Raspberry Pi by USB cable and HDMI cable. HDMI cable is used to display and a USB cable is used to touch. Similar to the 5-inch resistive touch screen, this 7 inch touch screen also supports backlight control with the ability to turn off the backlight to save power. The 7-inch screen possesses a larger screen as compared to other 5 inch and 3.5 touch screens making it a lot easier to use and providing a better user experience overall. So go ahead and grab one now!!!!

Please Note – This product DOES NOT ship with the Raspberry Pi 4B (1GB) or the Raspberry Pi 3B+. 

What are some of the features of the case – Here’s a listing of some of the features of the case.

  1. 7-inch standard display
  2. With a capacitive touch screen, maximum support 5 point touch.
  3. Used as a Raspberry Pi display that supports Raspbian, Ubuntu, Kodi, win10 IOT, single-touch, free drive.
  4. Work as a PC monitor, support win7, win8, win10 system 5 point touch (XP and older version system: single-point touch), free driver.

What are the specifications of this product –  Here’s the specifications of this product.

  1. Weight: 390.2g
  2. Size:  21×14.5x5cm

What’s included in the kit – Here’s a listing of all the components included in this kit –

  1. 1 x 7 inch TFT LCD
  2. 1 x USB cable
  3. 4 x Double pass copper column
  4. 4 x Fixing screw
  5. 1 x HDMI cable
  6. 1 x CD

 About the Raspberry Pi 4B –  The Raspberry Pi 4 Model B is the latest version of the Raspberry Pi. Just add a keyboard, mouse, display, power supply, micro SD card with installed Linux Distribution and you’ll have a fully fledged computer that can run applications from word processors and spreadsheets to games. The Raspberry Pi 4 Model B builds upon the features of its predecessors with a new, faster processor 1.5Ghz Quad Core Cortex-A72 Processor on board to increase its speed. It also features on-board WiFi and Bluetooth Low Energy capabilities to enhance the functionality and the ability to power more powerful devices over the USB ports.

The latest Raspberry Pi 4 Model B offers 1GB/2GB/4GB LPDDR4 SDRAM, Full-throughput Gigabit Ethernet, Dual-band 802.11ac wireless networking, Bluetooth 5.0, Two USB 3.0 and two USB 2.0 ports, Dual monitor support with resolutions upto 4K (WOW!!!), VideoCore VI graphics, supporting OpenGL ES 3.x and 4Kp60 hardware decode of HEVC video.

Want to check out the differences between the Pi 3 B+ and the Pi 4 B, check out this article at CNX-Software.com.

Here are the technical specifications of the Raspberry Pi 4B –

  1. Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
  2. 1GB, 2GB or 4GB LPDDR4-2400 SDRAM (depending on model)
  3. 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE
  4. Gigabit Ethernet
  5. 2 USB 3.0 ports; 2 USB 2.0 ports.
  6. Raspberry Pi standard 40 pin GPIO header (fully backwards compatible with previous boards)
  7. 2 × micro-HDMI ports (up to 4kp60 supported)
  8. 2-lane MIPI DSI display port
  9. 2-lane MIPI CSI camera port
  10. 4-pole stereo audio and composite video port
  11. H.265 (4kp60 decode), H264 (1080p60 decode, 1080p30 encode)
  12. OpenGL ES 3.0 graphics
  13. Micro-SD card slot for loading operating system and data storage
  14. 5V DC via USB-C connector (minimum 3A*)
  15. 5V DC via GPIO header (minimum 3A*)
  16. Power over Ethernet (PoE) enabled (requires separate PoE HAT)
  17. Operating temperature: 0 – 50 degrees C ambient

You should be able to use a good quality 2.5A power supply if downstream USB peripherals consume less than 500mA in total.

The Raspberry Pi 4B supports the following operating systems –

  1. Raspberry Pi Foundation’s Officially supported Operating Systems
    1. NOOBS
    2. Raspbian
  2. Third Party Operating Systems (Support for the below Operating Systems is currently Work in Progress)
    1. Libreelec
    2. Open Elec
    3. OSMC
    4. Pinet
    5. RISC OS
    6. Snappy Ubuntu Core
    7. Ubuntu Mate
    8. Weather Station
    9. Windows IOT Core
    10. XBian

Raspbian is the recommended operating system for normal use on a Raspberry Pi.

Feeling like digging into the Raspberry Pi 4 specifications a bit deeper, then check out the following links –

  1. Raspberry Pi 4 Model B product brief
  2. Raspberry Pi 4 Model B schematic diagrams
  3. Raspberry Pi 4 Model B mechanical drawing
  4. Documentation including hardware and configuration

Development Tracks & Tutorials –  If you are keen to start programming with the Arduino UNO, Arduino MEGA or the Raspberry Pi we have you covered. We offer a range of FREE development tracks and tutorials through our digital Learning Management System (LMS) at KidzCanCode. Our FREE development tracks and tutorials let you get started with block based programming, python programming, game development of even the fundamentals of electronics using the BBC micro:bit. Here’s a list of the development tracks and tutorials on offer. Check out the KidzCanCode website to learn more.

  1. Exploring Electronics fundamentals using Raspberry Pi & Python
  2. Exploring fundamentals of electronics using the Arduino UNO
  3. Exploring coding concepts using the BBC micro:bit – I
  4. Exploring coding concepts using the BBC micro:bit – II
  5. Exploring coding concepts using the BBC micro:bit – III
  6. Introduction to electronics using the BBC micro:bit – I
  7. Introduction to electronics using the BBC micro:bit – II
  8. Design interactive games using the BBC micro:bit
  9. Introduction to MicroPython using the BBC micro:bit
  10. Kitronik Inventors kits for the BBC micro:bit

Please use the contact us form to drop us a note with ideas for tutorials and development tracks. We are always looking for ideas and constructive input. Alternatively you can reach us at oztoylib@hack2.live.

 

Additional information

Weight0.200 kg
Dimensions15 × 10 × 5 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.