Selected:

Raspberry Pi 4B Acrylic Case with Cooling fan and Camera bracket (Compatible with 3.5inch screen)

$16.99

Out of stock

Raspberry Pi 4B Acrylic Case with Cooling fan and Camera bracket (Compatible with 3.5inch screen)

$16.99

What does the Raspberry Pi 4B Acrylic Case with Cooling fan (Compatible with 3.5 inch screen & camera) have to offer – This acrylic case is designed for the Raspberry Pi 4B with a one-to-one correspondence of hole positions. The cooling fan and camera bracket can be installed and are compatible with 3.5-inch displays. The top cover is easy to open and close for easy wiring. When installing a 3.5-inch display, there is no need to install a top cover and a cooling fan. This acrylic case is installed without a screwdriver and has a bayonet design for easy installation. Be sure to watch the video during installation. Acrylic materials are brittle, improper installation or violent installation may cause the outer casing joint to break.

  • Please Note –
    • This kit DOES NOT ship with the Raspberry Pi 4B (1/2/4 GB), the Raspberry Pi 3B+, LCD screen or the Pi Camera.
    • This kit DOES ship with the acrylic camera mount.

 

Out of stock

SKU: otl-000-0152 Categories: , Tags: , ,

Description

What does the Raspberry Pi 4B Acrylic Case with Cooling fan have to offer – This acrylic case is designed for the Raspberry Pi 4B with a one-to-one correspondence of hole positions. The cooling fan and camera bracket can be installed and are compatible with 3.5-inch displays. The top cover is easy to open and close for easy wiring. When installing a 3.5-inch display, there is no need to install a top cover and a cooling fan. This acrylic case is installed without a screwdriver and has a bayonet design for easy installation. Be sure to watch the video during installation. Acrylic materials are brittle, improper installation or violent installation may cause the outer casing joint to break.

  • Please Note –
    • This kit DOES NOT ship with the Raspberry Pi 4B (1/2/4 GB), the Raspberry Pi 3B+, LCD screen or the Pi Camera.
    • This kit DOES ship with the acrylic camera mount.

 

What are some of the features of the case – Here’s a listing of some of the features of the case.

  1. Designed for Raspberry Pi 4B
  2. With Cooling fan
  3. Compatible with 3.5inch screen and camera bracket (Camera mount not provided with this version)
  4. Easy assembly and connection

 

   

What’s included in the kit – Here’s a listing of all the components included in this kit –

  1. Acrylic board *6
  2. Gasket *4
  3. Screw/nut *4
  4. Cooling fan *1
  5. Rivet *8

The optional acrylic camera mount is not included with this product.

About the Raspberry Pi 4B – The Raspberry Pi 4 Model B is the latest version of the Raspberry Pi. Just add a keyboard, mouse, display, power supply, micro SD card with installed Linux Distribution and you’ll have a fully fledged computer that can run applications from word processors and spreadsheets to games. The Raspberry Pi 4 Model B builds upon the features of its predecessors with a new, faster processor 1.5Ghz Quad Core Cortex-A72 Processor on board to increase its speed. It also features on-board WiFi and Bluetooth Low Energy capabilities to enhance the functionality and the ability to power more powerful devices over the USB ports.

The latest Raspberry Pi 4 Model B offers 1GB/2GB/4GB LPDDR4 SDRAM, Full-throughput Gigabit Ethernet, Dual-band 802.11ac wireless networking, Bluetooth 5.0, Two USB 3.0 and two USB 2.0 ports, Dual monitor support with resolutions upto 4K (WOW!!!), VideoCore VI graphics, supporting OpenGL ES 3.x and 4Kp60 hardware decode of HEVC video.

Want to check out the differences between the Pi 3 B+ and the Pi 4 B, check out this article at CNX-Software.com.

Here are the technical specifications of the Raspberry Pi 4B –

  1. Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
  2. 1GB, 2GB or 4GB LPDDR4-2400 SDRAM (depending on model)
  3. 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE
  4. Gigabit Ethernet
  5. 2 USB 3.0 ports; 2 USB 2.0 ports.
  6. Raspberry Pi standard 40 pin GPIO header (fully backwards compatible with previous boards)
  7. 2 × micro-HDMI ports (up to 4kp60 supported)
  8. 2-lane MIPI DSI display port
  9. 2-lane MIPI CSI camera port
  10. 4-pole stereo audio and composite video port
  11. H.265 (4kp60 decode), H264 (1080p60 decode, 1080p30 encode)
  12. OpenGL ES 3.0 graphics
  13. Micro-SD card slot for loading operating system and data storage
  14. 5V DC via USB-C connector (minimum 3A*)
  15. 5V DC via GPIO header (minimum 3A*)
  16. Power over Ethernet (PoE) enabled (requires separate PoE HAT)
  17. Operating temperature: 0 – 50 degrees C ambient

You should be able to use a good quality 2.5A power supply if downstream USB peripherals consume less than 500mA in total.

The Raspberry Pi 4B supports the following operating systems –

  1. Raspberry Pi Foundation’s Officially supported Operating Systems
    1. NOOBS
    2. Raspbian
  2. Third Party Operating Systems (Support for the below Operating Systems is currently Work in Progress)
    1. Libreelec
    2. Open Elec
    3. OSMC
    4. Pinet
    5. RISC OS
    6. Snappy Ubuntu Core
    7. Ubuntu Mate
    8. Weather Station
    9. Windows IOT Core
    10. XBian

Raspbian is the recommended operating system for normal use on a Raspberry Pi.

Feeling like digging into the Raspberry Pi 4 specifications a bit deeper, then check out the following links –

  1. Raspberry Pi 4 Model B product brief
  2. Raspberry Pi 4 Model B schematic diagrams
  3. Raspberry Pi 4 Model B mechanical drawing
  4. Documentation including hardware and configuration

Development Tracks & Tutorials –  If you are keen to start programming with the Arduino UNO, Arduino MEGA or the Raspberry Pi we have you covered. We offer a range of FREE development tracks and tutorials through our digital Learning Management System (LMS) at KidzCanCode. Our FREE development tracks and tutorials let you get started with block based programming, python programming, game development of even the fundamentals of electronics using the BBC micro:bit. Here’s a list of the development tracks and tutorials on offer. Check out the KidzCanCode website to learn more.

  1. Exploring Electronics fundamentals using Raspberry Pi & Python
  2. Exploring fundamentals of electronics using the Arduino UNO
  3. Exploring coding concepts using the BBC micro:bit – I
  4. Exploring coding concepts using the BBC micro:bit – II
  5. Exploring coding concepts using the BBC micro:bit – III
  6. Introduction to electronics using the BBC micro:bit – I
  7. Introduction to electronics using the BBC micro:bit – II
  8. Design interactive games using the BBC micro:bit
  9. Introduction to MicroPython using the BBC micro:bit
  10. Kitronik Inventors kits for the BBC micro:bit

Please use the contact us form to drop us a note with ideas for tutorials and development tracks. We are always looking for ideas and constructive input. Alternatively you can reach us using the Facebook chat option at bottom of the webpage.

 

Additional information

Weight0.200 kg
Dimensions15 × 10 × 5 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

!!! Interested In Getting Yourself/Your Child Started With Coding - Electronics - Robotics ? Call Us Now - 0423607688 !!!Shop Now
×

Cart

Want a 5% Discount On Your Order?
Subscribe to our mailing list and get a 5% discount coupon. Don't miss out!!
    SUBSCRIBE
    I agree with the term and condition